15 Tips on How To Waterproof Leather Boots

"I get commissions for purchases made through links in this post."

How to waterproof leather boots? It’s actually a lot simpler than you thought! If you’ve ever spent a day out hiking or jogging, you must know how a wet pair of boots can ruin the entire trip. Not only does it make you feel uncomfortable, but it also creates the ideal environment for blisters.

Worry not! This article includes the ultimate solutions to the problem you’re encountering. Without further ado, let’s get started!

How to Waterproof Leather & Fabric Boots?

Below are 3 of the convenient ways you can consult when you want to make your shoes waterproof. Check them out!

Method 1: Waterproofing Creams, Pastes, and Waxes

Waterproofing Creams


The cream works best if you own a pair of leather boots. Usually, this product comes with a special tool to apply to your foot; nonetheless, a clean cloth is also fine. Apply just enough cream on the external surface of the boots. Try to cover the entire boots; if there are hard-to-reach areas, try using Q-tips.

Pastes – Mink Oil


The paste (also known as mink oil) compound is quite similar to cream. However, several types of pastes will darken your leather boots, so you should test out the product in a small area to make sure you like the result before applying it to the entire boot.

As for the application, follow the same steps as when you apply the cream.



A wide range of waxes is available on the market with a special formula to restore the already-existed waterproof feature of leather. That being said, it is great to use wax on leather and suede boots. Currently, Beeswax is the most used on the market.

With waxes, warm the wax using a blow dryer or placing it near a heat source for a while, by doing this, you’re enhancing the adhesion feature of the compound. The wax shouldn’t turn into liquid but you should be able to spread effortlessly and evenly on the entire surface.

Then, you can either use your fingers (with gloves on) or use a soft cloth to get the wax onto the shoe. You’d want to cover the surface with a somewhat thick, even coat throughout the entire boot. Don’t forget the tongue!

Once you’re done adding waxes, use a clean cloth to wipe off the excess wax.

But how can you tell if there’s extra wax? After you’ve added 1 coat, leave your boots to dry in a corner. In the next hours, or even better, overnight, you’ll see if there’s excess wax. Remove them, and apply the next coats (if you want to; it’s not a bad move to add 1 – 2 more coats).

Applying wax can be harder than other methods; nonetheless, this is worth the time and effort because waxes can easily get into the nooks and crannies.

Method 2: Waterproofing Sprays


To apply the spraying method, you need to ensure your boots are clean and damp first. This waterproofing treatment works best on leather, suede, and synthetic materials.

Start by running water into the thickness of your leather boots. The great time to do this is right after you have cleaned the shoes. It is worth mentioning that there is no need to run water all over your boots.

If the shoes are not moist enough after cleaning, use a wet towel and wrap it around them; leave them to sit for 2 – 3 hours.

Once your boots are entirely soaked in water, apply the waterproofing spray. Different kinds of sprayers may require slightly different ways of applying, so make sure you read that carefully before starting.

Allow the spray to cure. If any has not been absorbed, wipe away the extra with a soft lint-free cloth.

Then, leave the boots to dry at room temperature in low humidity. We don’t recommend using any heat source as it may harm the outcome; however, you can use a fan.

Note: If your boots have a Gore-Tex membrane, there’s no need to apply any of these methods in that area.

Method 3: Water-resistant for leather & fabric boots with Item Household

vegetable oil

If you’re trying to make use of the item household of your house when waterproofing boots, have you ever thought about vegetable oil? Vegetable oil has good conditioning effects when applied to the leather material. It maintains the leather fibers in good condition and restores the smooth and shine feature.

First, apply the oil to the leather area with your fingers. Then, dab on the oiled area with a paper towel or a clean cloth. The paper towel will get rid of the excess oil (if there is any).

Next, use another clean paper towel to pat dry the boots. Leave the shoes to dry in a cool, warm place (preferably overnight).

Note: Whichever method you’re going for, make sure that the waterproofing has fully cured and dried before doing anything else. If the shoes feel sticky, that means you need to put in more work to buff away the extra compound.


Below are some of the commonly asked questions about ways to waterproof boots. Check them out!

1. What is the best way to waterproof work boots & walking boots?

To be honest, there’s no such thing as the best, only the most suitable. One method can work for a person, yet not for another.

From our perspective, using a waterproof spray is probably the easiest treatment that doesn’t require much effort. And regardless of the type of method you choose, always remove the shoelaces beforehand.

The perfect time to waterproof boots is probably during sunny fall days when it’s not too terribly hot. Moreover, the process of waterproofing your boots should be carried outside in a well-ventilated area, so the fumes or compounds don’t get on your furniture.

Thus, these methods can be applied to all kinds of leather boots, including hiking boots, work boots, or even hunting boots.

2. Will WD 40 waterproofing boots?

WD 40 waterproof boots

WD 40 has far more uses than you think, and enabling the waterproof feature on footwear is one of them.

You only need to spray a light coat of WD 40 onto the surface of your boots; It will work as a barrier to stop water from entering your shoes, keeping your feet ultra-dry and comfortable throughout the day.

Even better, you can use WV40 as a stain remover. Just spray a light coat of this garage staple to your boots, and gently use a cloth to wipe off.

3. Can you use Vaseline to leather boots waterproof?

Yes, you can. But the waterproof effect is not going to last as long as it does with the mentioned compounds. Remember to clean the shoes beforehand for the best outcome.

4. Should you oil new leather boots?

Even though it might be tempting to oil them, your boots need time to break in first.

Leather boots will embrace the form of your insteps; you just need to give it some time. In other words, your feet play themselves out as a mold to your newly-bought shoes, and since every person has a different form of instep, the shoe forms will vary as well.

Intensive oiling makes it hard for the break-in process to happen, resulting in an all-over-the-shop fitting pair of boots. You can start oiling your shoes after 80 – 100 hours; your shoes are now in the preserving phase.

To Wrap Up

Keeping your feet dry and comfortable all day shouldn’t be too hard now once you know how to waterproof boots! Feel free to share with us the one you like best, and if you have any questions, don’t hesitate to drop a comment down below!

How to waterproof boots? We think you got it by now!

Leave a Comment